Use TI OMAP-L138 high-performance DSP, with a computing capacity of up to 3648 MIPS and 2746 MFLOPS per second, built-in multiple audio algorithms, 48KHz sampling rate.
32-bit DSP processing, 48KHz sampling rate, 32bit ADC and 24bit DAC.
The input processing includes: port input, noise gate, gain control, mute, phase,11-band EQ, Xover, input compression, 2000ms input adjustable delay, linkage adjustment and other processing functions.
The output processing includes:11-band EQ, 2000ms adjustable output delay, gain control, mute, phase, Xover, output limit, port output, linkage adjustment and other processing functions.
Parameter settings between any channels can be freely copied, and any channel can be linked adjustment.
All input and output channels can be auto EQ by importing channel parameters
There are six types of equalization: peaking, notch, all pass 1st, all pass 2nd, high shelf and low shelf.
All input compressor have thresholds, ratios, start-up time, recovery time and compensation gain adjustable.
All output limiter are included: threshold, recovery time can be adjusted, brick wall type limiter, starting time is 0, absolute limit.
The delay of all input and output channels with 2000ms delay.
Built-in signal generator, input mode can choose pink noise, white noise, sweep frequency and 20Hz-20KHz sine wave adjustable, signal amplitude adjustable.
The front panel has input and output level indicator, function buttons, the rear panel has RS232 control port and the 100M network port connection. One-button connection makes the user's operation easier and faster.
It supports 32 preset scenes to be saved, and the device scene algorithm and each preset can be saved and loaded separately. It also has the permission management function to make the device more secure.
Application: professional performances, bar, conference rooms, courtrooms, auditoriums, multi-function halls, etc.
Technical Parameters:
Frequency response: 20Hz - 20kHz 100 dB
Dynamic range unweighted: 107dB weighting
Input: (2) XLR - female (1) XLR RTA Mic Input
Maximum Input Level 34dBu with 30-position Input Jumper
Maximum Power Level 22dBu
Output: (6) XLR - male
Input Impedance 40 kOhms
Output Impedance 120 Ohms
Sample Rate 48kHz
RTA Mic Phantom Voltage 15 Volts
Crosstalk (Output) 100dB
THD Noise 0.002% typical at 4 dBu, 1kHz
Input Gain 0dB
©2024 Enping City Dongming Trading Co. Ltd copyright.